AUTMATCH Trailer Hitch Ball Mount with 2” Hitch Ball - Fits 2" Receiver 2” Drop

How To Choose Trailer Hitch Ball Mount?

Q:How Much Weight You Are Going To Be Towing?

A:Should Never Exceed The Weight Capacity Of Any Component Of Your Vehicle, Trailer Or Trailer Hitch Setup.

Q: What Size Receiver Tube Of Your Trailer Hitch?

A: Receiver Tubes Come In A Handful Of Standard Sizes, Including 1-1/4, 2, 2-1/2 And Sometimes 3 Inches, So Finding A Ball Mount To Match Is Relatively Easy.

Q: How Much Drop Or Rise Your Ball Mount Will Need?

A: This Hitch Is Rated To Be Flipped Over To Give 3/4" Rise As Well As The 2" Drop

PACKAGE INCLUDES:

• 1Pc 2" Trailer Hitch Ball Mount
• 1Pc 2" Inch Tow Ball & Rubber Washer
• 1Pc 2" Hitch Tightener Anti-Rattle Clamp
• 1Pc 5/8" Trailer Hitch Lock Pin with Extra Safety Spring Clip & 2 Spare Keys

AUTMATCH TRAILER HITCH BALL MOUNT KIT FEATURES:

Heavy-Duty TRAILER HITCH BALL MOUNT

*Trailer Hitch Mount With Ball Provides Reliability For Your Towing Setup: 2-Inch Trailer Hitch Ball - GTW: 8,000Lbs with TW: 800Lbs

*Construct Of Ultra-Strong Drop Forged Steel, Protected With By Polished Chrome Plating, Galvanized & Powder Coated Finish

*Easy To Be Installed And Insert The Shank Into 2" Hitch Receiver And Then Connect The Two Vehicles With The Trailer Ball

*This Hitch Is Rated To Be Flipped Over To Give 3/4" Rise Or The 2" Drop To Level Trailer Line

HOW TO USE THE HITCH TIGHTENER

1.Drop The U-Bolt and Slide It To Touch The Face of Hitch.

2.Push The Tightener Plate Onto U-Bolt With Raised End Away From The Hitch Receiver

3.Have The Washer, Lock Washer and Nut To One Side of The U-Bolt. Hand Tighten Nut To Hold Washers In Place.

4.Tighten The Nuts Evenly Until Metal Plate Is Tight To The Stinger And Hitch. Check The Nuts Periodically To Ensure That They Remain Tight.

ANTI-THEFT PUSH-TO-LOCK DESIGN

*1/4 Turn Lock and Push To Lock Design, Easy To Operate.

*2 Unique Tubular Keys Improve The Security and Anti-Theft Function Of The Lock

*Watertight Dust Rubber Cap Prevents Locking Mechanism Internal Corrosion.

*Each Lock Is Keyed Unique and Please Keep it Well

*AUTMATCH Motto: Go Anywhere & Do Anything!

HOW TO DETERMINE DROP OR RISE?

After You Know How Much Weight You Will Be Towing And The Size Of Your Receiver Tube, You Will Need To Determine The Drop Or Rise Necessary For Your Trailer.

Drop Or Rise Is The Amount Of Height Difference Between The Trailer And Your Tow Vehicle, Whether That Difference Is Positive (Rise) Or Negative (Drop).

The Diagram Offers A Quick Explanation For How To Determine Your Needed Drop Or Rise. Take The Distance From The Ground To The Top Of The Inside Of Your Receiver Tube Opening (A), And Subtract It From The Distance From The Ground To The Bottom Of The Trailer Coupler (B).

A Minus B Equals C / The Drop Or Rise.