Laboratory Lift Water and Oil Bath 2L | Constant temperature control, intelligent control, LED display, maximum temperature 250℃

➤SPECIFICATIONSModel: Lift TypeCapacity: 2L, 3L, 5LPower: 1.2KW, 1.5KW, 2KWTemperature control range: room temperature to 250°CTemperature control accuracy: ±1°CTemperature control method: PID intelligent temperature controlTemperature uniformity: 80%Inner tank dimensions: 240 x 140 mm, 260 x 150 mm, 280 x 170 mm➤HOW TO USE1. Place the electronic constant temperature oil and water bath on a stable platform. Attach the hose to the drain outlet, then fill the water bath container with clean water (hot water can be used to reduce heating time).2. Turn on the device; the red OFF light will illuminate. Adjust the temperature using the temperature control knob to the desired setting: the water will begin to heat and the power light will illuminate. The light will turn off when the set temperature is reached, indicating that the water is maintaining a constant temperature.3. Once the water bath has reached a constant temperature, place the container with the material in the water bath to begin heating and maintain that temperature.4. To optimize temperature consistency, seal the contact area between the constant temperature container and the bath with cardboard, ensuring that the material inside the container is lower than the level of the constant temperature water bath.5. After use, remove the container, turn off the device, and drain the water from the box. Remember to record your use of the instrument.➤PACKAGE INCLUDES1 x Constant Temperature Oil Water Bath1 x Instruction Manual